SCULPFUN S30 5W Automatic Air-assist Laser Engraver 410x400mm Engraving Area Expandable Laser Cutter

SCULPFUN S30 Feature:

• Upgraded gas-assisted laser engraving: Sculpfun S30 series is equipped with a gas-assisted 32-bit motherboard and a controlled air pump, and the gas-assisted switch during engraving can be intelligently controlled through the M8 button of the LightBurn software.
• Excellent engraving performance: The S30 5W laser is cost-effective and can meet 90% of hobby needs; it can cut 5mm balsa wood and 3cm plywood at one time. And with the extremely strong high-precision linear slide X-axis to achieve industrial-grade engraving accuracy, there is no wave pattern in the engraving of small objects.
• Built-in high-pressure gas-assisted nozzle: S30 series laser engraver is equipped with advanced high-pressure gas-assisted metal nozzle, which can generate high-pressure airflow under the action of the air pump, which greatly improves the cutting efficiency and makes the cutting surface very clean. The cutting speed is greater than 5 times faster than that without air assistance1 times.
• Replaceable protective lens: The use of innovative replaceable lens greatly improves the service life of the laser, which is more than 10 times longer than other ordinary lasers.

SCULPFUN S30 Laser Engraver Specification:

• Model: Sculpfun S30
• Power input: 100-240V AC, 50/60HZ Output: 12V 5A
• Engraving accuracy: 0.005mm
• Engraving area size: 410*400mm
• Machine power: about 60WDiode laser output power: 5W (note that this is light energy not electrical energy)
• Laser focus: 0.06x0.06mm
• Laser wavelength 455±5nm
• Focusing method: fixed focus column + sliding device
• Laser protection cover: Equipped with a detachable laser protection cover to protect the eyes. You can adjust it up and down, or remove the goggles.Type: Air pump controlled by motherboard, voltage 12V, flow rate 30L/min
• Inner diameter of trachea: 7.5mm
• Carving materials: all kinds of wood (including walnut, cherry wood and other high-density wood), MDF, zigzag, cardboard, plastic, leather, PCB board, aluminum oxide, 304 stainless steel, ceramics, dark stone
• Cutting materials: all kinds of wood (including walnut, cherry wood and other high-density wood), MDF, acrylic board, cardboard, non-woven fabric, bamboo, leather, some plastic boards, PCB boards
• Operating software: LightBurn (M8 with air-assisted function), LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, support Windows system, support MAC system. Supported file formats NC, BMP, JPG, PNG, DXF and other image formats
• Package size: 62.3x24x22.5cm/24.5x9.4x8.8in
• Package weight: 6.7 kg/14.7 lbs