How To Deal With The Scorching Phenomenon Of Laser Cutting Machine

How To Deal With The Scorching Phenomenon Of Laser Cutting Machine

Atomstack laser cutting machine is an efficient and precise processing equipment, but it still encounters burnt phenomenon during use. Once this kind of problem occurs, it will not only damage the machine equipment, but also affect product quality and production efficiency. Therefore, during the operation of the laser cutting machine, we need to take measures to prevent and deal with the burning phenomenon of the laser cutting machine.

Causes Of Scorching

Before understanding how to deal with laser cutting machine burning phenomenon, we need to understand its causes. The burning phenomenon of laser cutting machine is generally caused by the following factors.

1. The laser power is too high

The cutting power of the Atomstack S30 Pro laser cutting machine is too high, which tends to burn the phenomenon. Generally speaking, the laser power should be adjusted according to the material being cut to prevent the laser beam from being too powerful and causing the material to burn.

2. Cutting speed is too slow

If the cutting speed is too slow, the laser beam will stay in the same place for a long time, causing local overheating and burning of the material.

3. The focusing lens is damaged or dirty

The focusing lens is an important part of the laser beam. If the lens is damaged or dirty, the focusing of the laser beam will fail, resulting in burning.

4. Poor material quality

If the quality of the cut material is poor, the surface is uneven or there are defects, the laser beam is easy to stay in the depression, resulting in local burning.

How To Prevent Scorching

In order to prevent the Atomstack S20 Pro laser cutting machine from burning during use, the following measures can be taken:

1. Choose the right power and speed

When using a laser cutting machine, the appropriate power and cutting speed should be selected according to the type and thickness of the material to be cut. At the same time, it should be adjusted according to the actual situation during the operation.

2. Regularly clean and replace the focusing lens

Regularly check and clean the focusing lens to keep its surface clean and intact to avoid contamination and damage to the lens. At the same time, when the lens is obviously damaged or dirty, it should be replaced in time.

3. Material surface treatment

Before cutting, the surface of the material can be treated, such as removing rust, oil, etc., to ensure that the surface of the material is clean and smooth.

4. Adjust the laser beam focus point position

During the operation of the Sculpfun S30 Pro Max laser cutting machine, the focus point position of the laser beam can be adjusted to make it perpendicular to the surface of the material, so as to ensure uniform local cutting.

How To Deal With Scorching

While preventing scorching, if scorching occurs, we also need to take timely measures to deal with it.

1. Reduce laser power

If the burning phenomenon is caused by excessive laser power, the laser power should be reduced immediately to avoid further damage to the material.

2. Increase cutting speed

If the cutting speed is too slow and causes burning, you can try to increase the cutting speed so that the laser beam stays less at the same position.

3. Replace the focusing lens

If the focusing lens is polluted or damaged and causes burning, the focusing lens should be replaced in time.

4. Replacement material

If there is a quality problem with the cut material, it can be replaced with a better quality material.

To sum up, the treatment method of the burning phenomenon of TwoTrees TTS-55 laser cutting machine is mainly to prevent and deal with it in time. For prevention, it is necessary to choose the appropriate power and speed, regularly clean and replace the focusing lens, treat the surface of the material, adjust the focus position of the laser beam, etc.; when processing, reduce the laser power, increase the cutting speed, replace the focusing lens, and replace the material. Only by doing the above prevention and treatment work well can the normal operation and cutting quality of the laser cutting machine be guaranteed.

Older Post
What Are The Advantages Of Laser Cutting Machine
Newer Post
What Is The Relationship Between The Engraving Speed Of The Laser Engraver And The Engraving Effect?

Laser Engraving Ideas